Why do i need to use a diode on the lock connected to a 2n device?
A protection diode is one of a few suppression devices for electronic door hardware. It is a standard semiconductor device integral to the safe and proper function of the access control system, it acts as a grounding tool, allowing the flow of ...
How to cycle the power on a POE port on an MXNet switch to reboot an encoder or decoder or CBOX
To do this you need access to the Web GUI of the MXNet POE switch. The 24 and 48 port switch have a management port. First you must set the management port of the MXNet POE switch to a valid IP address for your network. You can view the KB article ...
Poor Audio Quality on 2N Verso
The 2N units are 3 high units. When you go 3 high you need to move the microphone down to the bottom.
Zektor Audio Management With C4
Control4 does not have the ability to extract audio from HDMI, their control system treats HDMI as a video only source. So to extract audio, you have to trick Control4 by using dummy bindings. Luckily they seem to know this is a problem, and have ...
Omni Phone Line Light and Click On and Off
Telephone Access Problems Checking the Phone Line Detection when the controller can't access the voice menu: Does the console display "PHONE LINE DEAD TROUBLE NOW"? All controllers are polarity sensitive and require a minimum of 24 VDC on the ...