The below recommendations may help where calling between an R20K and Control4 either don't work at all or if video is not coming though properly.
It is important to update the R20K to the latest firmware or at least the beta firmware 320.30.12.104.
The R20K uses the All ring group only and C4 auto sets the SIP account used to be SIP 2. Other named groups are not supported. It is required to ensure the C4 registration settings are enabled on Account 2 on the unit too.
It may not be required, however in C4 we believe that setting alternate camera is what helped video to pass through.
The speed dial in the R20K web interface for a quick press button to call is on the same call setting page as the manager dial. Copy 'All/2" from the Cloud call section that C4 auto-fills to be in speed dial section too.