Custom Image On Indoor Touch
Background image – there is the 2N’s launcher enabled in default. If you would like to change or adjust the home screen, you may create your own Android launcher or use some 3rd party launcher. To be able to do that you would need from us an additional LAUNCHER license which allows you to switch to a different one. If you send us a serial number of your unit we may provide you a demo license for your testing.
Screensaver – in order to extend the screen lifetime, the IDT doesn’t allow you to set an unlimited display timeout in default, and therefore there is no screensaver available. Alternatively you may use a 3rd party screensaver app to achieve such a functionality. I have found plenty of them eg. here: https://play.google.com/store/apps/collection/search_results_cluster_apps?clp=ggENCgtzY3JlZW5zYXZlcg%3D%3D:S:ANO1ljIjl54.
Related Articles
Fusion player skipping Spotify tracks
If you ever run across a client where the play queue in Spotify is just skipping through tracks, the below instructions will guide you through the process of switching them from the older plug-in to the newer one. 1) Enable expert mode within the ...
Gmail Allow less secure apps no longer working
As of 30/05/22 Google will no longer support the use of third-party apps or devices which ask you to sign in to your Google Account using only your username and password. This will effect Visualint cameras that are using Gmail to send email ...
Why do i need to use a diode on the lock connected to a 2n device?
A protection diode is one of a few suppression devices for electronic door hardware. It is a standard semiconductor device integral to the safe and proper function of the access control system, it acts as a grounding tool, allowing the flow of ...
HDMI CEC in MXNet Mentor
In order to send an HDMI CEC command from Mentor, we need to know the values for the following; SOURCE, DESTINATION, OPCODE. Then depending on the Opcode being used, you may also need some additional parameters under the DATA field. SOURCE: This will ...
UPDATING XANTECH ACM FIRMWARE TO V1.34 (latest release - 2/8/24)
To update xantech video over IP ACM module to latest firmware - v1.34 (latest as of 2/8/24) follow the attached guide, then make sure to follow integration note for the product found in management cloud if link to fw download within the guide is not ...