How to enable IP Control on LG TVs
You will need the basic IR remote as the magic remote will not work.
Make sure the TV is on an input with no signal such as Live TV with no aerial.
Press and hold the Setting button on the remote.
Wait until the banner on the left pops up letting you DTV no signal then enter 1105 and press OK as quickly as you can.
That will pop up the hidden menu.
Make sure IP Control is enabled and you can also generate a code.
Make sure Wake on LAN in enabled.
Related Articles
How do I setup Xantech Video Over IP?
The first thing you want to do is plug the switch into your network in the office and find its IP address from the router and log into the switch. Default login is araknis and araknis and it will force you to change the password away from default. ...
How To: Using the MXNet USB Control Tool
Powerpoint and software for the USB Control Tool used when configuring Point To Point, Multicast Settings, and Control Routing. Extra information. To manually set the channel to 0000 via command line astparam s ch_select 0000;astparam save;sleep ...
Troubleshooting Tips For Access Control Reader
Wiring is one of the biggest causes for problems when using the 75A00-2 Access Card Reader. The pinout for the built-in serial ports on Leviton controllers are: With the above stated, your pinout should be using Pins 4 & 5, where Pin 5 should be ...
Video stream from external Pakedge IP camera shows intermittent network error
If you are adding a Pakedge (Lilin?) camera to a 2N intercom or video kit using the enhanced video licence function, we have had reports that the stream connection will flick between connected and network error To resolve this go into the Network ...
What is the difference between Visualint and Lilin IP Cameras
The key differences between Visualint and Lilin would be Analytics and Starlight Technology. Analytics Visualint Intelligent cameras are equipped with a full analytical engine built into each camera. This means that there is a microprocessor in each ...