How to log in/out of the Q on 3CX PBX

• Related Articles

• Putting an agent in and out of the queue on Asterisk Based Virtual PBX

  Queue Agents *96 – login the queue agent owning the extension If you are an agent in a queue and you want to take calls from your personal extension, you can dial *96 from your extension phone keypad in order to login to the system. You will be ...

• Araknis Spanning Tree

  By default Spanning Tree, is enabled in Araknis 210 and 310 switches, but the Root Bridge is usually an overlooked element.  Spanning Tree Protocol (STP) is a Layer 2 protocol that decides the best path for LAN traffic when multiple options exist, ...

• 2n Automation - Start a Phone Call to My2n based upon Incoming Call

  Register SIP1 to the PBX and SIP2 to My2n Create a Directory User for the My2n Mobile Devices Create Automation based upon CallStateChange > Call Answered, Where CallerID is the incoming phone number, If the phone number is dynamic and you want all ...

• INTEGRATING ELAN GATE CONTROL WITH APPLE HOME (SIRI VOICE CONTROL)

  OVERVIEW This guide explains how to control a gate connected to an ELAN controller using Siri via Apple Home. The solution uses: - ELAN String-to-Event driver - Homebridge running on Raspberry Pi - homebridge-garagedoor-command plugin - TCP string ...

• Akuvox X912 Not Registering in Control4

  Assuming that the firmware is fully up-to-date (912.30.11.61 as of time of writing), if an X912 still won't pull correctly into Control 4, it may be that the intercom hasn't automatically enabled itself for Control 4 operation The following "hidden" ...