Poor Audio Quality on 2N Verso

Poor Audio Quality on 2N Verso

The 2N units are 3 high units. When you go 3 high you need to move the microphone down to the bottom.
    • Related Articles

    • Poor audio quality on intercom to a door station

      if you get poor audio quality at the door station using ELAN then try enabling QOS on the router and the switches. You do not need to configure anything, just enable it. That will priorities audio packets and improve the audio quality. 
    • How do I setup audio return paths in MXNet 1G V2

      A decoder can only be routed to one encoder at a time. You can't have one decoder sending an Audio Return Signal to multiple encoders, for example. A lot of sites utilize CEC for volume adjustment/control of source and sink devices, this ...
    • Stream 2 audio is corrupted

      If you experience this issue then set the unit to reboot the Linux server process daily at 3 am. This simply starts the single Linux process and takes seconds to execute and will solve this problem. Run up the Ovation utility  Go to Manage and ...
    • Zektor Audio Management With C4

      Control4 does not have the ability to extract audio from HDMI, their control system treats HDMI as a video only source. So to extract audio, you have to trick Control4 by using dummy bindings. Luckily they seem to know this is a problem, and have ...
    • Do you have a template for the 2N Verso or Solo name label?

      Yes we do, see attached.