UPDATING XANTECH ACM FIRMWARE TO V1.34

UPDATING XANTECH ACM FIRMWARE TO V1.34 (latest release - 2/8/24)

To update xantech video over IP ACM module to latest firmware - v1.34 (latest as of 2/8/24) follow the attached guide, then make sure to follow integration note for the product found in management cloud

if link to fw download within the guide is not longer valid please contact support and we will send you the file

compatible firmware values for acm and Tx/Rx modules is below, any mismatch to the units on your project please discuss with our support team

 

If they are using a ELAN or Xantech ACM then you can mix and match units as long as version is 1.5.6 or 1.5.1


    • Related Articles

    • MXNET EV/DV2 FPGA Firmware Mismatch - How to Check & Resolve

      MXNET Firmware Update: Troubleshooting Guide Issue Overview: AVPro Edge’s latest FPGA firmware update (version 9.18.9) introduces valuable enhancements, but some users with older firmware (version 9.13.1) may experience compatibility issues, ...

    • How to recover an Araknis AP from firmware update failure

      So when you see the SSID failsafe, this means that there is an issues with the firmware. The IP address of the WAP will be 192.168.20.253. If you static your computer to 192.168.20.xxx you should be able to plug the WAP into your computer and access ...

    • How do I setup Xantech Video Over IP?

      The first thing you want to do is plug the switch into your network in the office and find its IP address from the router and log into the switch. Default login is araknis and araknis and it will force you to change the password away from default. ...

    • SpeakerCraft MRA-664 Resources

      Factory Reset https://www.dropbox.com/s/afuj17rza6hlmc3/factory_reset.zip?dl=0 Latest Firmware https://www.dropbox.com/s/mf5zzgram6nbzb9/2_1_126_0.exe?dl=0

    • Accessing ATEN PDU WebGUI When An SSL Error Is Reported

      It may be experienced that access to the WebGUI of an ATEN PDU such as the PE6108G or the PE8216G is restricted due to an SSL security error. The reason for this is that the PDUs on earlier firmwares use TLS 1.0 whereas many browsers have now been ...