Video stream from external Pakedge IP camera shows intermittent network error
If you are adding a Pakedge (Lilin?) camera to a 2N intercom or video kit using the enhanced video licence function, we have had reports that the stream connection will flick between connected and network error
To resolve this go into the Network settings section of the IP camera, and disable the RTCP check function
Related Articles
How do I setup Xantech Video Over IP?
The first thing you want to do is plug the switch into your network in the office and find its IP address from the router and log into the switch. Default login is araknis and araknis and it will force you to change the password away from default. ...
Pull a MJPEG Stream From a Luma NVR For a Luma Camera Connected Direct to NVR
This can be done with the following URL http://<IP address of the device>:<web port of the device>/wps-cgi/mjpg/video.cgi?camera=<number>&resolution=640x480&username=<user>&password=<password> Where IP address is the NVR and port is the port the NVR ...
Stream 2 audio is corrupted
If you experience this issue then set the unit to reboot the Linux server process daily at 3 am. This simply starts the single Linux process and takes seconds to execute and will solve this problem. Run up the Ovation utility Go to Manage and ...
What is the difference between Visualint and Lilin IP Cameras
The key differences between Visualint and Lilin would be Analytics and Starlight Technology. Analytics Visualint Intelligent cameras are equipped with a full analytical engine built into each camera. This means that there is a microprocessor in each ...
Using Traceroute on OvrC hub to identify network issues
If a client is experiencing unusual network behaviour or devices dropping off the hub, running a traceroute may help identify issues, specifically how many node hops are happening, Once you login to the OvrC Hub (default credentials are user: ovrc, ...