Accessing Rako Hub on OvrC

Accessing Rako Hub on OvrC

To access a Rako Hub on OvrC, you need to set the port scan for HTTP to other. Its been reported that a Rako hub will only show an available SSH connection. This is because port 80 gets redirected to a secure page sub domain which OvrC cant scan. 

Site Settings > Network Ports Scanned













Then either change the default HTTP scan to 'Other'


Then go back and perform a 'Network Scan' and leave it to finish. 

Then go to the Rako Hub and you will see 


Open the connection and you will get a web link, copy the URL and put into a web browser and you will be able to access the hub


Changing the setting to Other does not affect port 80 on existing devices. 

    • Related Articles

    • Using Traceroute on OvrC hub to identify network issues

      If a client is experiencing unusual network behaviour or devices dropping off the hub, running a traceroute may help identify issues, specifically how many node hops are happening,  Once you login to the OvrC Hub (default credentials are user: ovrc, ...

    • Accessing Telnet Devices in OvrC

      There is a bug in OvrC were Telnet doesn't connect to devices via OvrC. Here is a workaround In OvrC, go to the site in question and navigate to Site Settings Click on Network Ports Scanned Change the Telnet default port scan (Port 23) to, 'Other'. ...

    • Sites with Multiple AP's across core and remote switches - if devices aren't appearing in the list when OvrC Hub scans

      Scenario: 24 port switch in the rack with AP(s) cabled to it, plus cable to a 5port switch with PoE passthrough providing data and power to a remote AP. Issue: OvrC hub did site scan but was not listing all devices on site, took a couple of scans and ...

    • Araknis/OvrC devices cant be reached via dashboard when using ISP router

      A new installation of an OvrC hub and 4x AP's on a site with latest SkyQ hub, OvrC dashboard works fine but you cant connect to Araknis devices in the device list you get the following error message the ports required to be opened are 53, 443

    • Adding a Luma NVR to OvrC

      Please be advised when adding the NVR to OvrC it is required to use the Mac address and the Serial number.   The ST number is NOT the serial number of the unit.   Please use the Luma utility or login to the unit to find the serial.   This is done for ...