SkyQ needs to have an EDID that it likes to allow you to select 2160p 10 Bit. If it does not have an EDID it is happy with it will not allow you to select 10 Bit colour and it will not offer the option to download UHD HDR content and will not play ...
You can read the EDID from an output you want with the following command on the console page: GET OUTx HP EDID DATA : Get HDMI Output x EDID DATA{x=[1~4]} GET OUTx TP EDID DATA : Get HDBT Output x EDID DATA{x=[1~4]} Then you can load any EDID block ...
if you get poor audio quality at the door station using ELAN then try enabling QOS on the router and the switches. You do not need to configure anything, just enable it. That will priorities audio packets and improve the audio quality.
Parking Orbits Imagine parking orbits as “rooms” within 3CX. Calls can be placed into these “rooms” by transferring them from your IP phone or 3CX client. There are 10 rooms available and shared, unrestricted, between all users. A max. total of 64 ...
A new installation of an OvrC hub and 4x AP's on a site with latest SkyQ hub, OvrC dashboard works fine but you cant connect to Araknis devices in the device list you get the following error message the ports required to be opened are 53, 443