ELAN
How to enable IP Control on LG TVs
You will need the basic IR remote as the magic remote will not work. Make sure the TV is on an input with no signal such as Live TV with no aerial. Press and hold the Setting button on the remote. Wait until the banner on the left pops up letting ...
Poor audio quality on intercom to a door station
if you get poor audio quality at the door station using ELAN then try enabling QOS on the router and the switches. You do not need to configure anything, just enable it. That will priorities audio packets and improve the audio quality.
Can you replace the battery in the HR10 or HR30?
These batteries are an off the shelf product from Varta Product code: VARTA Easy Pack 56456 701 099 I had a quick look online and they retail for about £40 inc VAT on Farnell – see link (UK Link to product) This is the same battery for the HR10 ...
Reload the HR200 Config On SSD
Unzip the file Connect the HR200 and type 3526 to make USB active Then treat it like a USB drive and format the drive using quick format Then copy the 6 files across to the newly formatted USB drive (this can take a while as transfer is slow – 10+ ...
How do I add Visualint Cameras to ELAN
ELAN requires an H.264 main stream for when the camera is full screen and a lower res MJPEG for the thumbnail view. With Visualint VIM Cameras, set the settings below on all the camera first using the local web GUI of the cameras. Set the stream 1 to ...